Samsung SyncMaster P2370HD Guide De L'utilisateur page 32

Setting Up Anynet
¦
Press the TOOLS button to display the Tools menu. You
T
can also display Anynet + menu by selecting Tools →
Anynet + (HDMI-CEC).
Setup
❑
+ (HDMI-CEC) → Off / On
Anynet
„
To use the Anynet + Function, Anynet + (HDMI-CEC) must be set
to On.
Anynet + (HDMI-CEC) function is disabled, all the
When the
N
Anynet + related operations are deactivated.
Auto Turn Off → No / Yes
„
Setting an Anynet + Device to turn Off Automatically when the
TV is Turned Off
The active source on the TV remote must be set to TV to
N
use the Anynet + function.
If you set Auto Turn Off to yes, connected external devices
N
are also turned off when the TV is turned off. If an external
device is still recording, it may or may not turn off.
Switching between Anynet
¦
1. Press the TOOLS button. Press the E button to select
Anynet + (HDMI-CEC).
2. Press the ▲ or ▼ button to select Device List, then press the
E button.
+ devices connected to the TV are listed.
Anynet
N
If you cannot find a device you want, press the red button to
N
scan for devices.
3. Press the ▲ or ▼ button to select a particular device and press
the E button. It is switched to the selected device.
Only when you set
N
Application menu, the Device List menu appears.
Switching to the selected devices may take up to 2 minutes. You cannot cancel the operation
N
during the switching operation.
The time required to scan for devices is determined by the number of connected devices.
N
When the device scan is complete, the number of devices found are not displayed.
N
Although the TV automatically searches the device list when the TV is turned on via the power
N
button, devices connected to the TV when the TV is on or under some conditions are not
automatically displayed in the device list. Press the red button to search for the connected
device.
If you have selected external input mode by pressing the
N
Anynet + function. Make sure to switch to an Anynet + device by using the Device List.
+
+ Devices
Anynet + (HDMI-CEC) to On in the
English - 30
+
Anynet (HDMI-CEC)
Device List
Setup
Move
U
Anynet + (HDMI-CEC)
: On
Auto Turn Off : Yes
Move
U
View TV
Device List
Record :
DVDR Menu
DVDR Operation
Setup
Move
U
SOURCE button, you cannot use the
►
Enter Return
E R
Enter Return
E R
DVDR
Enter Return
E R