Samsung SyncMaster P2370HD Guide De L'utilisateur page 31

To connect to Home Theater
TV
DIGITAL
AUDIO OUT
(OPTICAL)
Optical Cable
1. Connect the HDMI IN jack on the TV and the HDMI OUT jack of the corresponding Anynet + device
using an HDMI cable.
2. Connect the HDMI IN jack of the home theater and the HDMI OUT jack of the corresponding
Anynet + device using an HDMI cable.
Connect the Optical cable between the
N
the Digital Audio Input on the Home Theater.
When following the connection above, the Optical jack only outputs 2 channel audio. You will
N
only hear sound from the Home Theater's Front Left and Right speakers and the subwoofer. If
you want to hear 5.1 channel audio, connect the DIGITAL AUDIO OUT (OPTICAL) jack on the
DVD / Satellite Box (ie Anynet Device 1 or 2) directly to the Amplifier or Home Theater, not the
TV.
Connect only one Home Theater.
N
You can connect an Anynet
N
support Anynet + functions.
+ works when the AV device supporting Anynet + is in the Standby or On status.
Anynet
N
+ supports up to 10 AV devices in total. Note that you can connect up to 3 devices of the
Anynet
N
same type.
HDMI IN
Home Theater
HDMI 1.3 Cable
DIGITAL AUDIO OUT (OPTICAL) jack on your TV and
+ device using the HDMI 1.3 cable. Some HDMI cables may not
English - 29
Anynet + Device
HDMI 1.3 Cable