Publicité
Les langues disponibles
Les langues disponibles
OPERATION INSTRUCTIONS
4. CHECKING FOR LEAKS
4.1 Burner connection
1. Make sure the regulator hose
and control valve connections
are securely fastened to the
burner and gas cylinder.
2. Visually check the connection
between the burner/venturi tube
and orifice.
3. Make sure the burner/venturi
tube fits over the orifice as
illustration.
4. If the burner/venturi tube does not rest flush to the orifice as illustration, Please
contract the service department for assistance.
• Failure to inspect this connection or follow this instruction could cause a fire or an
explosion which can cause death, serious bodily injury ordamage to property.
• The burner must be replaced prior to the appliance being put into operation if it is
evidentthat the burner is damaged. The replacement burner shall be that specified
by the manufacturer.
4.2 Cylinder/Gas line connection
1. Make 2~3oz. of leak detection
solution (one part liquid
dishwashing
detergent and three parts water)
2. Make sure Propane gas
cylinder valve is closed and
control knob
is in the off "
" position.
3. Connect propane gas cylinder
per "Installing Propane Gas
Cylinder"
4. Apply several drops of solution as illustration.
5. Turn propane gas cylinder valve to "OPEN"
If any bubbles appear at any connection, there is a leak.
1. Turn off the gas cylinder, reconnect regulator/hose assembly, and re-test.
2. If you continue to see the bubbles after several attempts, turn off the gas cylinder
and disconnect gas cylinder, contract the service department for assistance.
3. If no bubbles appear after one minute, the connections are secure. turn off gas
cylinder and wipe away solution and proceed.
18
4.1 Burner connection
WARNING
4.2 Cylinder/Gas line connection
OPERATION INSTRUCTIONS
WARNING
• DO NOT use this appliance until any and all leaks are corrected. If you are unable
to stop aleak, disconnect the propane cylinder, Call a gas appliance serviceman or
your local gas supplier.
• Conduct the leak test outdoors in a well-ventilated area.
• DO NOT use matches, lighters or a flame to check for leak.
• Always perform a leak test before lighting this appliance and each time the
propane cylinder is connected for use.
5. LIGHTING INSTRUCTION
• Failure to follow this lighting instruction may result in serious bodily injury or
death, or in a fire or an explosion causing damage to property.
5.1 Before Lighting
WARNING
· For outdoor use only.
. Never light the burner with the cover on this appliance. Table lid must be removed
when burner is in operation.
· Keep your appliance free and clear from combustible materials, gasoline and other
flammable vapors and liquids.
1. Make sure all labels, package and protective films have been removed from this
appliance.
2. Check for obstructions of air flow to the burner. Spiders, insects and webs can clog
the burner/venturi tube.
A clogged burner tube can lead to a fire.
3. Clean the ignition box area, make sure the rocks away from ignition box.
4. Connect gas cylinder per "Installing Propane Gas Cylinder" section.
CAUTION
DANGER
19
Publicité
