Publicité
Les langues disponibles
Les langues disponibles
1.
After unpacking, check all parts for any transport damage.
Inform the supplier immediately of any faults.
2.
Later complaints cannot be considered.
3.
Make sure the delivery is complete.
4.
Before putting into operation, familiarize yourself with the ma-
We wish you much pleasure and success with your new
Kity machine.
NOTE:
In accordance with valid product liability laws, the manufacturer
of this device shall not be responsible for damage
to and from this device which results from:
1.
Improper care.
2.
Noncompliance with the Operating Instructions.
3.
Repairs made by unauthorized persons.
The installation and use of any parts which are not original Kity
4.
replacement parts.
6.
Improper use and application.
7.
Failure of the electrical system as a result of noncompliance
with the legal and applicable electrical directives and VDE regu-
lations 0100, DIN 57113 / VDE 0113.
We recommend that you read through the entire operating
instructions before putting into operation.
These operating instructions are to assist you in getting to know
General notes .........................................................................................................................16
Dear customter, ......................................................................................................................16
D GB
Contents .................................................................................................................................16
Set-up: ....................................................................................................................................16
Transport: ...............................................................................................................................16
m Safety instructions .............................................................................................................17
m Use only as authorized ......................................................................................................17
m Remaining hazards ............................................................................................................17
Assembly ................................................................................................................................19
Initial operation .......................................................................................................................20
Notes on working ...................................................................................................................21
Servicing ................................................................................................................................22
Electrical connection ..............................................................................................................22
Troubleshooting ......................................................................................................................23
Special Accessories ...............................................................................................................22
EC Declaration of Conformity ................................................................................................23
Spare parts list ....................................................................................................................... 42
Guarantee ..............................................................................................................................44
Prepare the workplace where the machine is to be placed.
Insure sufficient room to allow safe work without malfunctions.
The machine is designed to operate in closed rooms
The machine may only be transported with suitable lifting
devices (crane or fork lift). The connection point for the
rope (crane) is on the upper band wheel cabinet. Never
lift from the saw bench. If the machine is to be moved frequently
within the work area, use of the wheel assembly
special accessory is recommended.
In these operating instructions we have marked the places
that have to do with your safety with this sign: m
All manuals and user guides at all-guides.com
General Notes
5.
6.
Dear costumer,,
your machine and utilize its proper applications.
The operating instructions contain important notes on how you work
with the machine safely, expertly, and economically, and how you
can avoid hazards, save repair costs, reduce downtime and incre-
ase the reliability and service life of the machine.
In addition to the safety requirements contained in these operating
instructions, you must be careful to observe your country's applica-
ble regulations.
The operating instructions must always be near the machine. Put
them in a plastic folder to protect them from dirt and humidity. They
must be read by every operator before beginning work and obser-
ved conscientiously. Only persons who have been trained in the use
of the machine and have been informed of the various dangers may
work with the machine. The required minimum age must be obser-
ved.
In addition to the safety requirements contained in these operating
instructions and your country's applicable regulations, you should
observe the generally recognized technical rules concerning the
operation of woodworking machines.
Contents
Set-up:
and must be placed stabily on firm level ground. Stability
is insured by attachment to the ground with 4 screws (Fig.
18).
Transport
16
chine by carefully reading these instructions.
Use only original Kity accessories, wearing or replacement
parts.You can find replacement parts at your Kity dealer.
When ordering, include our item number and the type and
year of construction of the machine.
Publicité
