Publicité
Regulatory Compliance and Safety Information Cisco 5000 Series Enterprise Network Compute System
Statement 1005 Circuit Breaker
Warning
This product relies on the building's installation for short-circuit (overcurrent) protection. To
reduce risk of electric shock or fire, ensure that the protective device is rated not greater than:
20A (AC), 5A (HVDC), 7A(DC)
Statement 1008 Class 1 Laser Product
Warning
Class 1 laser product.
Statement 1015 Battery Handling
Warning
To reduce risk of fire, explosion or leakage of flammable liquid or gas:
• Replace the battery only with the same or equivalent type recommended by the manufacturer.
• Do not dismantle, crush, puncture, use sharp tool to remove, short external contacts, or dispose
of in fire.
• Do not use if battery is warped or swollen.
• Do not store or use battery in a temperature > 131 °F or 55°C.
Statement 1024 Ground Conductor
Warning
This equipment must be grounded. To reduce the risk of electric shock, never defeat the ground
conductor or operate the equipment in the absence of a suitably installed ground conductor.
Contact the appropriate electrical inspection authority or an electrician if you are uncertain that
suitable grounding is available.
Regulatory Compliance and Safety Information - Cisco 5000 Series Enterprise Network Compute System
3
Publicité
