KitchenAid 5KHM7210 Manuel D'utilisation page 6

PRODUCT USAGE
OPERATING THE SPEED CONTROL
These KitchenAid Hand Mixers will beat faster and more thoroughly than most other electric
Hand Mixers. Therefore, the beating time in most recipes must be adjusted to avoid over
beating. Beating time is faster due to larger beater sizes.
To help determine the ideal beating time, observe the batter or dough and beat only until it has
the desired appearance described in your recipe, such as "smooth and creamy". To select the
best beating speeds, use the "Speed Control Guide" section.
1.
Plug the Hand Mixer into an electrical outlet.
2.
Slide the Power switch to the "I" (ON) position. The motor will automatically start at Speed
1, and the "1" on the speed indicator control will light up.
3.
Touch the "UP (arrow)" button to increase the mixing speed to the desired setting. If
necessary, touch the "DOWN (arrow)" button to decrease the mixing speed. See the
"Speed Control Guide" for more information.
NOTE: The Hand Mixer automatically starts at Speed 1 every time it is turned on,
regardless of the speed setting at the time the Hand Mixer is shut off.
4.
When mixing job is finished, slide the Power switch to the "O" (Off) position. Unplug the
Hand Mixer before removing accessories.
PRODUCT DISASSEMBLY
REMOVING THE ACCESSORIES
1.
If the Hand Mixer is running, stop the Hand Mixer by sliding the Power switch to the
"O" (Off) position. Unplug the Hand Mixer from the electrical outlet.
2.
Press the Ejector Button to release the accessories from the Hand Mixer, then remove
them.
6
WARNING
Injury Hazard
Unplug mixer before touching
beaters.
Failure to do so can result in
broken bones, cuts, or bruises.