Télécharger Imprimer la page

GOK SBS/MA Notice De Montage Et De Service page 20

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 21
Close all free connections in the feed lines of the LPG system tightly with a
suitable cap to prevent gas from flowing out.
DISPOSAL
To protect the environment, our products may not be disposed of along with
household waste.
The product must be disposed of via a local collection station or a recycling station.
TECHNICAL DATA
TECHNICAL DATA LOW PRESSURE
Nominal pressure
Nominal flow rate
Maximum admissible pressure PS
Ambient temperature
Housing material
TECHNICAL DATA MEDIUM PRESSURE
Nominal pressure
Nominal flow rate M
Maximum admissible pressure PS
Ambient temperature
Housing material
TECHNICAL DATA HIGH PRESSURE
Nominal pressure
Nominal flow rate at 6 bar
Nominal flow rate at 10 bar
Maximum admissible pressure PS
Ambient temperature
Housing material
For additional technical data or special settings, see type label of the product!
WARRANTY
We guarantee that the product will function as intended and will not leak during
the legally specified period. The scope of our warranty is based on Section 8 of
our terms and conditions of delivery and payment.
TECHNICAL CHANGES
All the information contained in this assembly and operating manual is the result of product
testing and corresponds to the level of knowledge at the time of testing and the relevant
legislation and standards at the time of issue. We reserve the right to make technical changes
without prior notice. Errors and omissions excepted. All figures are for illustration purposes
only and may differ from actual designs.
10 / 10
g
Regler- und Armaturen-Gesellschaft mbH & Co. KG
Obernbreiter Straße 2-16 • 97340 Marktbreit / Germany
Tel.: +49 9332 404-0 • Fax: +49 9332 404-43
E-Mail: info@gok-online.de • Internet: www.gok-online.de
Excess flow device SBS
29; 50; 70 - 200 mbar
max. 12 kg/h
16 bar
-20 °C to +50 °C
Brass CW617N
0.3 bar to 4.0 bar, fixedly adjusted
max. 30 kg/h
16 bar
-20 °C to +50 °C
Brass CW617N or zinc die-casting
ZP0410
6.0 bar to 10.0 bar, fixedly adjusted
10 kg/h to 12 kg/h
12 kg/h
16 bar
-20 °C to +50 °C
Brass CW617N

Publicité

loading

Ce manuel est également adapté pour:

Sbs/auSbs/stSbs/ma 15St