6. Care and maintenance
•
Clean the model carefully after every fl ying session.
•
The model and the remote control system components should only be cleaned using suita-
ble materials.
Please ask your local model shop for advice on this.
7. Trouble shooting
Problem
Propeller does not ro-
tate
Propeller suddenly
stops rotating
The Sky Surfer is not re-
sponding to commands
of the transmitter
37
Cause
•
ON/OFF-switch OFF
•
Flight battery fully discharged
•
Battery almost discharged, the
ESC switches off the motor for sa-
fety reasons
•
Throttle stick not calibrated
•
Transmitter - Receiver not bound
together
Solution
•
Switch ON the model
•
Charge fl ight battery
•
Charge fl ight battery
•
push the left throttle stick to the top
of the transmitter once (full throttle)
and then again all the way down
(motor off)
•
Bind transmitter / receiver - see
point 11
Operating Instructions Sky Surfer 2.0