Publicité
Les langues disponibles
Les langues disponibles
SM125
The tool's plastic components are marked according to their material, which makes it possible to remove
environmental friendly and differentiated because of available collection facilities.
Only for EU countries
Do not dispose of electric tools together with household waste material!
In observance of the European Directive 2012/19/EU on waste electrical and electronic
equipment and its implementation in accordance with national law, electric tools that have
reached the end of their life must be collected separately and returned to an environmentally
compatible recycling facility.
14.
Noise emission / Vibration
The indication of noise emission is measured according to DIN 45 635, part 21. The level of acoustic pressure on
the work place could exceed 85 dB (A); in this case protection measures must be taken.
Wear ear protectors!
The typical hand-arm vibration is below 2.5 m/s².
Measured values determined according to EN 60 745.
The declared vibration emission level represents the main applications of the tool. However if the tool is used for
different applications, with different accessories or poorly maintained, the vibration emission may differ. This may
significantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is
switched off or when it is running but not actually doing the job. This may significantly reduce the exposure level
over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool
and the accessories, keep the hands warm, organisation of work patterns.
15.
Dust protection
Dust from material such as paint containing lead, minerals and metal may be harmful. Contact with or inhalation
of the dust may cause allergic reactions and/or respiratory diseases to the operator or bystanders.
Certain kinds of dust are classified as carcinogenic. Material containing asbestos must only be treated by
specialists.
Where the use of a dust extraction device is possible it shall be used.
To achieve a high level of dust collection, use industrial vacuum cleaner (category M) together with this
tool.
The work place must be well ventilated.
The use of a dust mask of filter class P2 is recommended.
16.
Warranty
According to our general terms of delivery for business dealings, suppliers have to provide to companies a
warranty period of 12 months for redhibitory defects (to be documented by invoice or delivery note).
Damages due to natural wear, overstressing or improper handling are excluded from this warranty.
Damages due to material defects or production faults shall be eliminated free of charge by either repair or
replacement.
Complaints will be accepted only if the tool is returned in non-dismantled condition to the manufacturer.
- 19-
5009006-00
BA-DE-GB-FR-NL (053;059)
Publicité
