GÖLZ SM125 Mode D'emploi Et Liste Des Pièces De Rechange page 15

SM125
2. Technical Data
Rated voltage
Power input
Frequency:
Max. disc diameter:
No load speed:
Spindle:
Protection class:
Degree of protection:
Net weight:
Interference suppression:
3. Content of delivery

Concrete grinder

Tool kit

Operating instructions

Metal case
4. Application for indented purpose
The concrete grinder is indented for professional use.
With an appropriate grinding wheel, the tool may be used for smoothing rough concrete, removing mould seams,
residual mud, joint fillers and tile adhesives.
Only use grinding wheels recommended by the manufacturer.
These have a small weight and a high concentricity. Using other grinding wheels can cause an overload
of the machine or damage of the bearings and danger to the user.
5. Safety instructions
Safe work with the machine is only possible if you read this operating instruction and
follow the instructions contained strictly.
Additionally, the general safety instructions of the leaflet supplied with the tool must be
observed. Prior to the first use, the user should absolve a practical training.
If the mains cable gets damaged or cut during the use, do not touch it, but instantly pull the
plug out of the socket. Never use the tool with damaged mains cable.
Danger of being ripped or cut
Concrete grinder SM125
230 V ~
1800 W
50-60 Hz
125 mm
10000 min
M 14
II
IP 20
ca. 5,9 kg
EN 55014 and EN 61000
- 15-
110 V ~
1650 W
-1
BA-DE-GB-FR-NL (053;059)
5009006-00