S&P HCM-150N Mode D'emploi page 6

sandwiched between the exterior grille
and interior fan casing.
- Wire the fan to the mains electrical
supply in accordance
enclosed electrical instructions.
- Before switching on the electrical
supply, locate the interior grille (1) to
the fan casing (3) and fix into position
by tightening the fixing screw (5).
Mounting the fan in a wall
- Firstly cut a circular hole in wall in
which the fan is to be installed. Cut the
hole size in accordance with the HCM
model size as indicated in Figure (A2).
- Figure (B). Remove the interior grille
(1) from the fan casing by loosening
the fixing screw (5).
- Remove the
shutters) by removing the interior
plastic fixing nuts (6).
- Separate the fan casing (3) from the
exterior grille (2).
- Position the fan casing against the
wall (over cut hole) and mark four
screw fixing positions through the
holes provided.
- Fix the fan casing to the wall with the
screws provided.
- Wire the fan to the mains electrical
supply in accordance
enclosed electrical instructions.
- Before switching on the electrical
supply, locate the interior grille (1) to
the fan casing (3) and fix into position
by tightening the fixing screw (5).
- If required the external grille can be
installed as follows:
- Remove the threaded fixing rods from
the external grille.
- Position the external grille against the
wall (cut hole) and mark two screw
fixing positions through the threaded
rod holes provided.
- Fix the exterior grille to the wall with
the screws provided.
with
exterior grille
with
Electrical Connection
- Before carrying out any installation or
wiring of the HCM range, ensure that
the the
disconnected.
- Before
connections ensure that the Voltage
and Frequency of the mains electrical
supply matches that of the fan data
plate
deviation of voltage and frequency +/-
5%).
Maintenance
- Before conducting any maintenance or
cleaning of the fan ensure that the unit
is disconnected
electrical supply.
(with - We
appliance is cleaned regularly to
ensure trouble free operation.
- To clean the appliance simply wipe
with a damp (not wet) cloth. Do Not
Use any abrasives or solvents.
- Do Not Use high pressure water or
steam cleaning apparatus to clean the
unit.
TECHNICAL ASSISTANCE SERVICE
All HCM panel mounting axial fans are
the offered with a comprehensive guarantee
and Technical
support. If the appliance is found to be
defective
guarantee
Assistance
contacted. Only then if necessary, the
product should be returned to an
authorised S&P supplier.
IMPORTANT:
carried out on the appliance by person(s)
not authorised by S&P will invalidate the
guarantee.
S&P
specifications without prior notice.
mains electrical
making
label (maximum
from
would recommend
Assistance
within the period
then local
Service should
Any repairs
reserves the
supply is
any electrical
permissible
the mains
that the
Service
of the
Technical
first be
or work
right to alter