Publicité
Les langues disponibles
Les langues disponibles
(4) Mowing deck engagement switch
Pressing the part with the symbol engages the mowing deck. Pressing the part without the symbol disengages the
mowing deck.
(5) Cruise control
Cruise control is only used when travelling in a long straight line. Before any change in direction it is necessary to
deactivate the cruise control.
(6) Deactivation of the mowing deck disengagement for reversing
Switch R serves to disengage the automatic mowing deck disengagement function when reversing
(
5.5.1).
(7) Brake pedal
(8) Parking brake controller
DISENGAGED
ENGAGED
Cruise control is active only when the ignition is turned on.
Cruise is disengaged by stepping down on brake pedal or turning off the switch.
The switch needs to be pressed when the mowing deck has already been automatically
disengaged but the blades have not yet stopped rotating (approx. 4 seconds) or when
the mowing deck is started immediately before the reverse travel pedal is stepped on.
Then with every subsequent change in the travel direction from reverse to forward, the
disengagement of the mowing deck is again reactivated.
Pressing the brake pedal will slow down the riding mower.
Never use the brake at the same time as the drive function – there is a danger of
damaging the transmission!
The parking brake has two positions. In position (1) the brake is not engaged, after
shifting to position (2) while stepping down on brake pedal the parking brake is engaged
(will brake).
Stepping on the brake pedal will disengage the parking brake and the lever will
automatically be released and shift to position (1).
79
Disengagement of the mowing deck / the mowing
deck is disengaged
Engagement of the mowing deck / the mowing deck
is engaged
Publicité
