Publicité
Les langues disponibles
Les langues disponibles
6.4 Lubrication
Lubricate the machine according to the following lubrication diagram.
Ball bearings of the tension pulleys, guide pulleys and bearings on the mowing deck are self-lubricating.
Before putting the machine out of service for an extended period, thoroughly lubricate all places shown on the diagram.
Namely the half axle of the front and rear axle (it is necessary to remove the rear wheels).
Symbol
Explanation
Plastic lubricant and grease
Oil SAE 30
6.4
10 50
Interval in hours
Plastic lubricant is used to lubricate:
steering segment - using a lubricating nipple
mowing deck lifting arms - using a lubricating nipple
tensioning pulley - remove, lubricate
central pivot pin of the front axle - using a lubricating nipple
angle joints connecting the steering draw bars - remove, lubricate
front wheel half axles - the interval is 10 hours!
Pivot points are lubricated with oil:
differential lock pedal
brake pedal
travel levers
Grease is used to lubricate:
front and rear wheel half-axles – grease A00
101
Publicité
