Care & Maintenance - PRO-POINT 8348674 Mode D'emploi

V1.0
CARE & MAINTENANCE
1. Maintain the tool with care. A tool in good condition is
efficient, easier to control and will have fewer problems.
2. Inspect the tool components periodically. Repair or replace
damaged or worn components. Only use identical
replacement parts when servicing.
3. Follow instructions for lubricating and changing accessories.
4. Only use accessories intended for use with this tool.
5. Keep the tool handles clean, dry and free from oil/grease at
all times.
6. Maintain the tool's labels and name plates. These carry
important information. If unreadable or missing, contact
Princess Auto Ltd. for replacements.
WARNING! Only qualified service personnel should repair the
tool. An improperly repaired tool may present a hazard to the
user and/or others.
CLEANING
Keep the tool clean. Wipe the tool with a clean cloth and
periodically blow out all areas with compressed air. If
compressed air is not available, use a brush to remove dust
from all areas. Do not use harsh chemicals or solvents to clean
the tool.
AIR TOOL LUBRICATION
NOTICE! Only use air tool oil to lubricate the tool. Other
lubricants are not suitable and will damage the tool or cause
a malfunction during use.
NOTICE! Never use a penetrating oil to lubricate an air tool.
Penetrating oil acts as a solvent that will dissolve the tool's
grease packing and may damage the o-rings, causing the tool
to seize or malfunction.
Visit www.princessauto.com for more information
All manuals and user guides at all-guides.com
AIR NEEDLE SCALER 8348674
9