PRO-POINT 8348674 Mode D'emploi page 5

V1.0
4. Support the workpiece or clamp it to a stable platform.
Holding the workpiece by hand or against your body may
lead to personal injury.
5. Securely hold this tool using both hands. Using a tool with
only one hand can result in loss of control.
SPECIFIC SAFETY PRECAUTIONS
WARNING! DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adherence to the
tool safety rules. If you use this tool unsafely or incorrectly,
you can suffer serious personal injury.
1. Use the correct tool for the job. This tool was designed for
a specific function. Do not modify or alter this tool or use it
for an unintended purpose.
2 Avoid unintentional starts. Be sure that the throttle/ignition
switch is in neutral or OFF position when not in use and
before connecting it to any air source. Do not carry the tool
with fingers near or on the lever.
AIR TOOL PRECAUTIONS
1. Inspect the tool's air hose for cracks, fraying or other faults
before each use. Discontinue use if the air hose is damaged or
hissing is heard from the air hose or connectors, while
operating the tool. Replace the defective component/air hose.
2. Do not allow people, mobile equipment or vehicles to pass
over the unprotected air hose. Position the air hose away
from high traffic areas, in a reinforced conduit or place planks
on both sides of the air hose to create a protective trench.
3. Prevent damage to the air hose by observing the following:
3.1 Never carry the tool by the air hose.
3.2 Keep the air hose behind the tool and out of the tool's
work path.
3.3 Keep the air hose away from heat, oil, sharp edges or
moving parts.
Visit www.princessauto.com for more information
All manuals and user guides at all-guides.com
AIR NEEDLE SCALER 8348674
5