Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
8348674
PERSONAL PROTECTIVE EQUIPMENT
1.
Always wear impact safety goggles that provide front and
side protection for the eyes. Eye protection equipment
should comply with CSA Z94.3-07 or ANSI Z87.1 standards
based on the type of work performed.
2.
Wear the appropriate type of full-face shield in addition to
safety googles, as the work can create chips, abrasive or
particulate matter.
3.
Wear gloves that provide protection based on the work
materials or to reduce the effects of tool vibration.
3.1 Do not wear gloves when operating a tool that can
snag the material and pull the hand into the tool.
4. Wear protective clothing designed for the work
environment and tool.
5.
Non-skid footwear is recommended to maintain footing
and balance in the work environment.
6.
Wear a NIOSH approved respirator when working on
materials that produce hazardous fumes, dust or
particulate matter.
7.
This tool can cause hearing damage. Wear hearing
protection gear with an appropriate Noise Reduction
Rating to withstand the decibel levels.
PERSONAL PRECAUTIONS
Control the tool, personal movement and the work
environment to avoid personal injury or damage to the tool.
1.
Do not operate any tool when tired or under the influence
of drugs, alcohol or medications.
2.
Avoid wearing clothes or jewelry that can become
entangled with the moving parts of a tool. Keep long hair
covered or bound.
3.
Do not overreach when operating the tool. Proper footing
and balance enables better control in unexpected situations.
4
All manuals and user guides at all-guides.com
AIR NEEDLE SCALER
For technical questions call 1-800-665-8685
V1.0
Publicité
Table des Matières
