limited by FCC regulations, and you may be required to correct any interference to radio or television
communications at your own expense.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case users will be required to correct the interference at their
own expense.
Statement 2020 Class A Warning Notice
This is a Class A product. In a domestic environment this product may cause radio interference in which case
the user may be required to take adequate measures.
Statement 2021 Class A Notice for Canada
This Class A digital apparatus complies with Canadian ICES-003.
Statement 53 Voltage Warning
Warning
A voltage mismatch can cause equipment damage and may pose a fire hazard. If the voltage
indicated on the label is different from the power outlet voltage, do not connect the chassis to
that receptacle.
Statement 371 Power Cable and AC Adapter
Warning
When installing the product, please use the provided or designated connection cables/power
cables/AC adaptors/batteries. Using any other cables/adaptors could cause a malfunction or a
fire. Electrical Appliance and Material Safety Law prohibits the use of UL-certified cables (that
have the "UL" or "CSA" shown on the cord), not regulated with the subject law by showing "PSE"
on the cord, for any other electrical devices than products designated by CISCO.
Regulatory Compliance and Safety Information - Cisco Webex Room 70 Panorama
6
Regulatory Compliance and Safety Information Cisco Webex Room 70 Panorama