Waeco MOBITRONIC MBC-8IU Manuel D'utilisation page 37

MBC-8IU_16IU.book Seite 37 Montag, 10. Dezember 2007 11:48 11
MBC-8IU, MBC-16IU
Note
During the charging process you can
– Interrupt the charging process at any time or
– Change the charging current, by pressing the "Charge Rate"
button (fig. 1 5, page 3) as often as required.
➤ If you wish to switch the display between the charging current and
charging voltage, press the "Display" button.
✓ The charging display (fig. 1 1, page 3) switches from flashing to
constant glow when the battery is fully charged.
Note
The compact charger starts recharging automatically if the
charging current rises to the threshold values shown in the
following table.
MBC-8IU
Charging
current
2 A
4 A
6 A
8 A
When the battery is charged:
➤ Switch the On/Off switch (fig. 1 10, page 3) to "OFF".
➤ Disonnect the mains cable (fig. 2 1, page 3) from the 230 V socket.
➤ Disconnect the black cable from the negative terminal of the battery.
➤ Disconnect the red cable from the positive terminal of the battery.
➤ Store the connection cable in the storage compartment (fig. 2 2,
page 3).
Threshold value
0.3 A
0.5 A
0.75 A
1.5 A
Using the compact charger
MBC-16IU
Charging
Threshold value
current
2 A
4 A
8 A
16 A
0.3 A
0.5 A
1.5 A
2.0 A
37