Setting The Regulator - Midea MK049ASTC Manuel D'utilisation

3. Make sure the Tap Tower Is In The Closed
(Handle Pointing Straight Up) Position.
secure The Connection By Pulling The
Coupler Handle Out And Pushing Down
Until It Locks Into Position. The Pull Handle
Will "Click" When It Shifts Into The Final
Downward Position. This Will Open The
Beer And CO Gas Valves. The Keg Is Now
2
Tapped.

Setting the regulator

The regulator connects the CO
per square inch) and the volume of CO
gauge between 8-12 psi for a nice, frothy head.
Overview
Pressure Dial: Adjusts
the output pressure
(loosen set screw with Allen Wrench)
CO
2
(shown in open position)
tank to the CO line, while measuring psi (pounds
2 2
in the tank. Set the output pressure
2
Pressure Relief Valve
(PRV): Allows gas to
to obtain an accurate
pressure reading.
Connects to
CO Line
2
15
Output Pressure Gauge:
Measures psi of CO
2
CO
2
Tank to Keg (0-60 psi)
Connects to
CO Tank
2