Installing The Guardrail / Drip Tray; Tapping The Beer Keg - Midea MK049ASTC Manuel D'utilisation

Installing the guardrail / drip tray

1. Place the guardrail on top of the unit and align all pegs of the guardrail with
the holes on top of the unit.
2. Ecure the guardrail to the unit by pushing the pegs inside the corresponding
holes.
3. Place the drip tray at the base of the tap tower.

Tapping the beer keg

(SINGLE VALVE-TYPE KEG)
1. Make sure the black pull handle of the
Coupler is in the open (up) position, then
insert the Coupler into the locking neck of
the beer keg.
2. Turn the Coupler clockwise until it locks
securely into position.
Tap Tower
Assembly
Guardrail
14
Tap Tower
Handle
Drip Tray