Product Installation - Midea MK049ASTC Manuel D'utilisation

PRODUCT INSTALLATION

Installing the castors
1. Empty the inside of the cabinet and lay the unit down on its side. To prevent
dents or scratches, we recommend placing a piece of cardboard or cloth
underneath the cabinet.
2. For the Front Castors, place Metal Washers over the Castor bolts, then insert
the Castors into the holes on the bottom corners of the cabinet. (The Rear
Castors do not require Metal Washers.) Tighten each Castor by turning each
metal bracket clockwise.
3. Once all four Castors have been tightened, stand the cabinet in the upright
position.
Locking the front castors
Assembly overview
Keg Coupler
NOTE
Each of the Front Castors include a locking mechanism to ensure the unit does
not roll on hard floors. The Front Castors should be fastened at the front end of the
unit, with the Non-Locking Rear Castors fastened on the rear end.
Unlocked
Regulator
Tap Tower
CO
2
Locked
Line
10
CO Tank
2