Publicité
Les langues disponibles
Les langues disponibles
39. Position the front belly pan (2) to the vehicle.
40. Install the four push pin fasteners (3) that secure the front belly pan (2) to the underside of the vehicle's
lower cross-member
41. Install the six screws (1) that secure the front belly pan (2) to the underside of the vehicle's front wheel
house splash shield. Tighten the screws
securely.
42. Install the six screws (4) that secure the front
belly pan (2) to the underside of the vehicle's
front fascia. Tighten the screws securely.
NOTE: During installation, ensure rear belly pan
is shingled underneath front belly pan.
Failure to do so may result in damage to belly
pan.
43. Position the rear belly pan (2) to the underside of
the vehicle and to the front fascia.
1/23/2012
Page 8 of 27
K6861534
Publicité
