Publicité
Les langues disponibles
Les langues disponibles
8. Remove the six screws (4) that secure the front belly pan (2) to the underside of the vehicle's front
fascia.
9. Remove the six screws (1) that secure the front belly pan (2) to the underside of the vehicle's front
wheel house splash shield
10. Remove the four push pin fasteners (3) that secure the front belly pan (2) to the underside of the
vehicle's lower crossmember.
11. Remove the front belly pan (2) from the underside of the vehicle.
12. Lower the vehicle
13. Pull out on the fascia at the upper fender to disengage
the fascia (1) from the upper fender retaining bracket.
Repeat on the opposite side.
14. Pull out on the fascia at the wheel house opening to
disengage the fascia (2) from the fender retaining
bracket. Repeat on the opposite side.
1/23/2012
Page 3 of 27
K6861534
Publicité
