GB
Operation
Switching on/off
Connect the mains plug.
Switching on the vacuum:
On/off switch (
Switching off the vacuum:
On/off switch (
Nozzle usage
Floor nozzle (
tachment (
19):
for wet and dry vacuuming of smooth sur-
faces and fitted carpets.
Floor nozzle (
attachment (
for wet and dry vacuuming of fitted carpets
and for removing persistent dirt.
•
Press the clips on the right and left side
of the floor nozzle (
the insert attachment (
Mind that sensitive surfaces might
get scratched if the insert attach-
ment is not used.
Crevice nozzle (
for vacuuming gaps, corners and radia-
tors.
Wet vacuuming
In order to wet vacuum, attach the foam
filter (15) onto the filter basket (21).
To avoid tearing the foam filter (15):
-
Use only a dry filter;
-
Turn over the edge of the filter a little.
38
3) in position "I"
3) in position "O"
18) with insert at-
18) without insert
19):
18) and remove
19).
20):
If the waste tank is full, a float
closes the suction opening, and the
vacuum operation is interrupted.
Switch off the machine and empty
the waste tank.
If foam or liquid exits, switch off the
machine immediately.
Dry vacuuming
For dry vacuuming, pull the material filter
(16) over the filter basket.
A corrugated filter, which can be
used instead of the fabric filter
included in delivery, is optionally
available (see „Replacement parts/
Accessories").
Vacuuming with the paper filter
bag:
To avoid the fluted filter becoming
clogged, we recommend the addi-
tional use of a paper filter bag.
Insert the material filter
1. Pull the material filter (16) over the fil-
ter basket (21).
Insert the paper filter bag
2. Fold down the side flaps (22) on the
paper filter bag (17) at the perforation.
3. Fit the paper filter bag (17) with the
short flap (22) upwards over the intake
connections (23) (see arrow
sealing ring (24) at the filter bag open-
ing must completely surround the lip on
the suction pipe.
A fine dirt filter bag made of micro
filter fleece is also optionally avail-
able, which can be used in place
). The