HP Smart Tank 7300 Serie Guide De Référence Et De Configuration page 10

Move printer properly
To move the printer to a different location
outside of your home or office after initial
setup, follow these instructions to prevent
ink leaks or printer damage.
1. Turn off the printer and remove the
power cord.
2. Lift the ink access door. Pull the gray tab
(toward the front of the printer) and lift
the printhead cover until the red label is
visible. Close the ink access door.
3. Pack the printer in a box (if available).
While moving the printer, keep the
printer horizontal to prevent
ink leakage.
4. After unpacking the printer, push down
on the printhead cover to close.
Make sure the cover is properly closed.
5. Connect the power cord and turn on
the printer.
hp.com/support/transportsmarttank
The information contained herein is subject to change without notice.
10
Help and Support
For printer troubleshooting and videos, visit the
HP support site. Enter your model name to find
the printer.
1
2
3
4
5
hp.com/support