emerio FAN-105025 Mode D'emploi page 5

FAN-105025
PARTS DESCRIPTION
1. Clamping ring
2. Front guard
3. Blade fastening screw
4. Fan blade
5. Guard fastening screw
6. Rear guard
7. Motor shaft
8. Rear shell
9. Control panel
10. Fastening screw
11. Height adjustment pipe
12. Fasten set
13. Standing shaft
14. Standing base
15. Fastener
16. L screw
17. Remote control
Control panel
A. On/off button
B. Timer button
C. Mode button
D. Swing button
E. Speed button (down)
F. Speed button (up)
a. Power light
b. Swing light (up and down)
c. Swing light (left and right)
d. Timer light
e. Speed light
f. Normal mode light
g. Sleep mode light
h. Nature mode light
i. Remote control sensor
ASSEMBLY INSTRUCTIONS
** Please assemble correctly by the following order when using.
1. Assembly of the stand
Connect the two parts of the base together into a cross.

Rotate the fastener and the L screw out from the bottom of the standing shaft.

Put the standing shaft into the standing base. Fix back with the fastener and the L screw.

- 4 -
EN