Publicité
Les langues disponibles
Les langues disponibles
9082694
1.
Tear the old sanding paper off of the wheel.
2.
Clean the wheel.
3.
Paste the new sanding paper to the disc evenly and smoothly.
1.
Maintain the tool with care. A tool in good condition is efficient,
easier to control and will have fewer problems.
2.
Inspect the tool components periodically. Repair or replace damaged
or worn components. Only use identical replacement parts when
servicing.
3.
Follow instructions for lubricating and changing accessories.
4.
Ensure guards and other safety features are in good working
condition before each operation.
5.
Keep the tool clean, dry and free from oil/grease at all times.
6.
Maintain the tool's labels and name plates. These carry important
information. If unreadable or missing, contact Princess Auto Ltd. for
replacements.
WARNING! Only qualified service personnel should
repair the tool. An improperly repaired tool may
present a hazard to the user and/or others.
Clean dust or other debris from the tool after each use.
Inspect and lubricate the tool when required. Only use light oil to lubricate
the tool. Other lubricants may not be suitable and could damage the tool
or cause a malfunction during use.
When not in use for an extended period, apply a thin coat of lubricant to
the steel parts to avoid rust. Remove the lubricant before using the tool
again.
NOTICE! NEVER use a penetrating oil to lubricate
the tool. Penetrating oil may act as a solvent
that will break down the grease and cause the tool
to seize up.
10
8 in. Belt Grinder Attachment
For technical questions call 1-800-665-8685
V1.0
Publicité
