Cleaning And Maintenance - Imetec E0801 Instructions Pour L'emploi

Masquer les pouces Voir aussi pour E0801:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 18
automatically.
• Switch the appliance back on by pressing the ON/OFF selector (4) and select the
desired temperature once again.
SWITCH-OFF
• Switch the heating pad off by pressing the ON/OFF selector (4) when it is no longer
used.
• Remove the plug from the socket.
The heating pad is washable. Refer to the washing symbols on the heating pad label for
the washing instructions.
Wash at 30°C.
Tumble-dry at less than 40°C.
Do not dry-clean.
WASHING INSTRUCTIONS
Always disconnect the plug and the control socket (5) from the socket (6) before cleaning.
MACHINE WASHING
• The heating pad can be machine washed at 30°C with a normal cycle.
• Only the gentle spin cycle is to be used. DO NOT set an additional spin cycle.
DRYING
• Set the dryer at a low temperature.
• Do not apply pegs on the electrical parts when hanging the heating pad to dry in order
not to damage them.
• DO NOT use the heating pad until it is completely dry.
The product is packaged in recyclable materials. Dispose of it in compliance with
the environmental protection standards.
The product must be disposed of appropriately, in compliance with European
standard 2002/96/EC. The recyclable materials contained in the appliance must be
recovered so as to prevent environmental pollution. For further information, contact
the local disposal body or the appliance dealer.

CLEANING AND MAINTENANCE

DISPOSAL
Do not bleach.
Do not iron.
GB
9

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

E0804E0802E0805E0803E0808

Table des Matières