Automatic Shutdown; Cleaning And Maintenance; Before Washing - Imetec TERMOFORO E0801 Instructions D'utilisation

AUTOMATIC SHUTDOWN

• The heating pad will provide a 3 hour heat treatment, then it will
automatically shut off. The standby led (2) will light up after the 3
hours of operating to indicate that the product has switched off
automatically.
• To switch the appliance back on by pressing the ON/OFF selector
(4) twice and select the desired temperature once again.
SWITCH-OFF
• Switch the heating pad off by pressing the ON/OFF selector (4) when
it is no longer used.
• Remove the plug from the mains socket.
The heating pad can be washed. Refer to the washing symbols on the
product label for the washing instructions.
WARNING! Always disconnect the appliance from the
mains and disconnect the control connector from the
appliance before cleaning or performing maintenance.

BEFORE WASHING

• Disconnect the power cable from the socket.
• Disconnect the heating pad connector (6) from the control unit
connector (5).
MACHINE WASHING
• The heating pad can be machine washed at 30°C with a normal cycle.
• Use the gentle spin cycle only. DO NOT run an additional spin cycle.
TUMBLE DRYING
• Tumble dry at a moderate temperature.

CLEANING AND MAINTENANCE

EN
16