Summit Treestands Dual Performer Mode D'emploi page 6

16
BUSHINGS
GUNREST
PAD
(PN 82064.740)
FOAM SEAT
1. Position the Foam Seat Base inside the frame as
shown in figure 19.
2. Wrap the hook and loop straps on the bottom and
back of the seat around the frame to secure.
3. Position the Foam Seat Back as shown. The Seat
back slips over the Seat Back Bar and is held in place
with hook and loop straps.
NOTICE
The foam seat included with this treestand is
removable for storage. DO NOT leave your stand
outdoors when it is not being used.
PG 6
17
18
FOAM SEAT
BACK
(PN 82064.855)
1 3/4" BOLT, LOCK NUT -
WRENCH TIGHTEN
FOAM SEAT
BASE
(PN 82064.850)
www.summitstands.com
19