Installation; Electrical Connection Rgb - BRÖTJE RGB Montage / Réglage

4.

Installation

4.1

Electrical connection RGB

Fig. 3: Strain relief
1
1. Insert cables and snap shut clips until they lock
2. Press down clip screws
3. Tighten clip screw with screwdriver
4. Lever open the snap-mechanism with a screwdriver to open the cable clips
Fig. 4: Wiring diagram
Room device RGB
Route connecting lines from RGB to boiler.
Here, the lines have to be fixed into the strain relief of the swit-
ching panel and to be connected according to the wiring diagram.
2 3
Wiring diagram
Installation
4
GB
33