Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
EN
Maintenance
interval
Regularly, every
6 months
Authorised repair shops
The addresses of authorised repair shops can be requested from
the Geberit sales companies.
Disposal
Disposal of Geberit pressing jaws
Geberit pressing jaws are made of steel. Therefore, Geberit
pressing jaws that are no longer in use do not belong in non-
recyclable waste. They must be directly returned to Geberit for
proper disposal or sent to a local collection point for scrap metal.
32
Maintenance work
▶
Check the Geberit FlowFit pressing jaw
using the Geberit FlowFit PowerTest to
ensure that the distance between the
pressing tips is permitted and that
enough pressing force is provided. If
defects are detected during the check,
the pressing jaw, pressing tool and
PowerTest must be sent to an authorised
repair shop.
18014405811351435 © 01-2022
969.975.00.0(01)
Publicité
Table des Matières
