Geberit FLOWFIT Mode D'emploi page 22

EN
• If there are incipient cracks, take the pressing
jaws out of service immediately, label them as
defective and do not use them again.
Avoiding damage to the Geberit pressing
jaws caused by faulty pressing operations
Geberit pressing jaws can be damaged by faulty
pressing operations or use, such as by being
pressed by foreign bodies.
• Do not tilt the pressing jaws on the pressfitting.
• If you suspect that the pressing jaws are
damaged (for example, if sharp edges appear
on the pressfitting after the pressing procedure),
they must be replaced.
Using personal protective equipment
People can be injured without suitable protective
equipment. Wear a protective helmet, protective
goggles and safety shoes during the pressing
procedure.
22
18014405811351435 © 01-2022
969.975.00.0(01)