Geberit FLOWFIT Mode D'emploi page 19

Basic safety notes
Intended use
The Geberit FlowFit pressing jaws are intended
exclusively for pressing Geberit FlowFit system
pipes and pressfittings.
Geberit recommends using Geberit FlowFit
pressing jaws in the following pressing tools only:
• Geberit pressing tools that carry the same
compatibility mark
pressing jaw.
Other pressing tools have not been tested by
Geberit in terms of their suitability for the Geberit
FlowFit pressing jaws. Using pressing tools with
excessive pressing force can significantly reduce
the service life of the pressing jaws.
Only use Geberit FlowFit pressing jaws that
correspond to the diameter of the Geberit FlowFit
pressfittings to be processed.
Only skilled persons qualified in pipe installations
are permitted to use Geberit FlowFit pressing
jaws.
18014405811351435 © 01-2022
969.975.00.0(01)
or as the Geberit FlowFit
EN
19