Publicité
Les langues disponibles
Les langues disponibles
•
Make sure you have a firm footing and that you can
work without being hampered by branches, stones
and trees.
WARNING:
trigger without having the cutting attachment
in full view.
To stop the product Aspire P5-P4A
1. Release the power trigger.
2. Push the on/off button on the user interface. The
LED lights go off.
Introduction
WARNING:
safety chapter before you do maintenance
work on the product.
Maintenance schedule
Maintenance
Clean the external parts of the product with a
dry cloth. Do not use water.
Make sure that the start and stop button op-
erate correctly and are not damaged.
Make sure that the power trigger and the
power trigger lockout operate correctly from
a safety point of view.
Make sure that all controls operate correctly
and are not damaged.
Keep the handles dry and clean. Makes sure
that that there is no oil and grease on the
handles.
Make sure that the saw chain cover is not
damaged. Replace the saw chain cover if it is
damaged.
Make sure that the screws and nuts are tight.
Make sure that the battery release buttons
on the battery operate correctly and lock the
battery in the product.
Make sure that the battery charger operates
correctly.
Make sure that the battery is not damaged.
Make sure that the battery is charged.
1867 - 005 - 26.10.2022
Never activate the power
Maintenance
Read and understand the
Daily
3. Push the release button and pull out the battery.
(Fig. 65)
To stop the product Aspire PE5-P4A
1. Release the power trigger.
2. Push the lock button forward to lock the product.
3. Push the release button and pull out the battery.
(Fig. 66)
4. If it is necessary, remove the telescopic shaft from
the pruner.
WARNING:
you do maintenance on the product.
Weekly
X
X
X
X
X
X
X
X
X
X
X
Remove the battery before
Monthly
415
Publicité
