Publicité
Les langues disponibles
Les langues disponibles
recommended. Adequate protective equipment will
reduce personal injury from flying debris or
accidental contact with the saw chain.
•
Always keep proper footing and operate the chain
saw only when standing on fixed, secure and level
surface. Slippery or unstable surfaces may cause a
loss of balance or control of the pole pruner.
•
When cutting a limb that is under tension, be alert
for spring back. When the tension in the wood fibres
is released, the spring loaded limb may strike the
operator and/or throw the pole pruner out of control.
•
Use extreme caution when cutting brush and
saplings. The slender material may catch the pole
pruner and be whipped toward you or pull you off
balance.
•
Follow instructions for lubricating, chain tensioning
and changing the bar and chain. Improperly
tensioned or lubricated chain may either break or
increase the chance for kickback.
•
Carry the pole pruner by the front handle with the
pole pruner switched off and away from your body.
When transporting or storing the pole pruner, always
fit the guide bar cover. Proper handling of the pole
pruner will reduce the likelihood of accidental contact
with the moving saw chain.
•
Cut wood only. Do not use pole pruner for purposes
not intended. For example: do not use pole pruner
for cutting metal, plastic, masonry or non-wood
building materials. Use of the pole pruner for
operations different than intended could result in a
hazardous situation.
•
Keep handles dry, clean and free from oil and
grease. Greasy, oily handles are slippery causing
loss of control.
•
Do not attempt to fell a tree until you have
an understanding of the risks and how to avoid
them. Serious injury could occur to the operator or
bystanders while felling a tree.
•
This pole pruner is not intended for tree felling.Use
of the pole pruner for operations different than
intended could result in serious injury to the operator
or bystanders.
•
We strongly recommend that first time users practice
sawing logs on a saw horse or cradle.
General pole pruner safety warnings
Follow all instructions when clearing jammed material,
storing or servicing the pole pruner. Make sure
the switch is off and the battery pack is removed.
Unexpected actuation of the pole pruner while clearing
jammed material or servicing may result in serious
personal injury.
General safety instructions
WARNING:
instructions that follow before you use the
product.
408
Read the warning
•
Remove the battery to prevent the product from
being started by accident.
•
This product is a dangerous tool if you are not
careful or if you use the product incorrectly. This
product can cause serious injury or death to the
operator or others.
•
Do not use the product if it is changed from its initial
specification. Do not change a part of the product
without approval from the manufacturer. Only use
parts that are approved by the manufacturer.
Injury or death is a possible result of incorrect
maintenance.
•
Do a check of the product before use. See,
Safety devices on the product on page 410 and
Maintenance on page 415 . Do not use a defective
product. Do the safety checks, maintenance and
service instructions described in this manual.
•
Children should be supervised to ensure that they
do not play with the product. Never allow children or
other persons not trained in the use of the product
and/or the battery to use or service it. Local laws
may regulate the age of the user.
•
Keep the product in a locked area to prevent access
for children or persons that are not approved.
•
Store the product out of reach of children.
•
Under no circumstances may the design of the
product be modified without the permission of the
manufacturer. Always use original accessories. Non-
authorized modifications and/or accessories can
result in serious personal injury or the death of the
operator and others.
Note:
National or Local laws can regulate the use.
Comply to given regulations.
Safety instructions for operation
WARNING:
warning instructions that follow before you
use the product.
•
Ensure that no people or animals come closer
than 15 m (50 ft.) while you work. When several
operators are working in the same area the safety
distance should be at least 15 m. Otherwise there
is a risk of serious personal injury. Stop the product
immediately if anyone approaches. Never swing the
product around without first checking behind you to
make sure that no one is within the safety zone.
•
Never use the product in bad weather, for instance in
dense fog, in heavy rain, strong winds, intense cold,
etc. Extremely hot weather may cause overheating
of the product. Working in bad weather is tiring
and often brings added risks, such as icy ground,
unpredictable felling direction, etc.
•
Do not allow children to use or be in the vicinity
of the product. Since the product is easy to start,
children may be able to start it if they are not kept
under full surveillance. This can mean a risk of
Read and obey the
1867 - 005 - 26.10.2022
Publicité
