Hilti WFE 450-E Mode D'emploi Original page 20

3 Description
3.1 Product overview
3.2 Intended use
The product is a hand-held, electrically powered random orbital sander. It is suitable for dry-sanding wood,
wood-based materials, composites, varnishes, paints, plastics, plaster and filler compounds with wearing,
replaceable sanding pads.
3.3 Possible misuse
• This product is not suitable for working on hazardous materials.
• This product is not suitable for working in a damp environment.
• Do not use the product for wet grinding.
3.4 Items supplied
Random orbital sander with dust box, dust bag, operating instructions.
Other system products approved for use with this product can be found at your local Hilti Store or
at:www.hilti.group.
4 Technical data
For rated voltage, rated current, frequency and/or input power, refer to the country-specific type
identification plate.
If the device is powered by a generator or transformer, the generator or transformer's power output must be
at least twice the rated input power shown on the rating plate of the device. The operating voltage of the
transformer or generator must always be within +5 % and -15 % of the rated voltage of the device.
Weight in accordance with EPTA procedure 01
No-load speed
Oscillations
Diameter, backing pad
Eccentric stroke
Outside diameter, dust removal connector
4.1 Noise information and vibration values in accordance with EN 60745
The sound pressure and vibration values given in these instructions were measured in accordance with a
standardized test and can be used to compare one power tool with another. They can also be used for a
14 English
1
Guide grip
@
Speed adjustment thumbwheel
;
On/off switch
=
Grip
%
Dust bag
&
Dust box
(
Position of type identification plate
)
Quality grip
+
Backing pad
§
Sanding disc with velcro fastener
/
Brake ring
:
Auxiliary grip
∙
WFE 450­E
2.2 kg
5,000 /min ... 10,000 /min
10,000 /min ... 20,000 /min
150 mm
4 mm
30 mm
326041
*326041*