Cleaning & Maintenance - Inventum GF635F Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

8
cleaning & maintenance
FILTERING OR CHANGING LIQUID FRYING OIL
Before changing or filtering the oil, always unplug the fryer and let it cool down completely. The liquid frying oil can be used longer, if
you filter it regularly.
This fryer has an oil filter to make it easier to filter the oil after every use. Remove after every use the basket
and slide the heating element with the oil filter upwards from the guiding rail. Slide the oil filter from the
heating element and throw away any residue left on the filter. Clean the oil filter with hot water and a mild
detergent or in the dishwasher. Thoroughly dry the filter before sliding it back on the heating element. Place
the heating element back.
10
Replace the liquid frying oil regularly, after 8 to 12 times.
Pour the cold liquid frying oil out of the reservoir. Used frying oil can be poured back into the bottles. Clean the reservoir with hot water
and a mild detergent or in the dishwasher. Thoroughly dry the reservoir. Fill the reservoir with new liquid frying oil.
Check each time if the level of the liquid frying oil is between the minimum and maximum level. Never wash away fat or oil through the
sink.
CLEANING THE FRYER
Before cleaning always unplug the fryer and let it cool
down completely. Remove the basket, the oil filter, the element and the reservoir out of the fryer. Clean the lid, the basket, the oil filter
and the reservoir in the dishwasher or with hot water and a mild detergent. Ensure that the parts are dried thoroughly after cleaning.
Clean the exterior of the fryer with a damp cloth and when needed a mild detergent.
Never use any abrasives! Never immerse the heating element, power cord or plug in water or other liquids.
13
English

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Gf645f

Table des Matières