Application Notes - Leuze electronic HT3C.V/4P-200-M8 Mode D'emploi

EN

Application notes

– Position the sensor vertically and parallel to the object.
– Only move objects in from the side and from the right or left. Moving in ob-
jects from the connector side or operating side is not permitted.
– Outside of the scanning range, the sensor operates as an energetic diffuse
reflection sensor. Light objects can still be reliably detected up to the scan-
ning range limit.
– The sensors are equipped with effective measures for the maximum avoid-
ance of mutual interference should they be mounted opposite one another.
Opposite mounting of multiple sensors of the same type must absolutely be
avoided.
– The sensor is most capable of reliably detecting a reflective surface or trans-
parent object in the recommended working range. The sensor can reliably
detect reflective surfaces or transparent objects in the entire scanning range;
however, the function reserve is reduced as compared with the recom-
mended working range.
1
A Scanning range: 15 ... 150 mm
B Light axis
C Adjustment range up to 150 mm
D black-white error < 10 % up to 100 mm
E Recommended working range
F Adjustment range from 20 mm
Outside of the scanning range, the sensor operates as an energetic dif-
fuse reflection sensor. Light objects can still be reliably detected up to
the scanning range limit.
The sensors are equipped with effective measures for the maximum
avoidance of mutual interference should they be mounted opposite one
another. Opposite mounting of multiple sensors of the same type
should, however, absolutely be avoided.
4