LUXSAR VDR1640D Guide D'installation Rapide page 21

LuxsarRemote 40 Playback
To Playback Remote Video:
•
Click <Play> on the top of the main window toolbar, and then <Remote Playback> tab.
•
The <From> and <To> on the top of the screen display the date and time from which
recorded video is available for playback.
•
Select the date and time of the segment to play back from the <Start> field. You can change
the date and time either by typing desired numbers directly or using the arrow buttons.
•
Select the camera(s) you want to play back. Click <Clear> to clear all of the camera entry
selections, and click <All> to select all of the camera entries.
•
Click <OK> to start the operation, or click <Close> to abort.
To Playback Local *.drv File:
•
Click <Open> and the file selection screen is displayed. Select the *.drv video file to playback
and click <OK>.
•
Click <OK> in the <Local Playback> Screen to start the operation, or click <Cancel> to abort
the playback.
•
View the video playback using the Playback controls.
•
After playback, click <Live> to return to live video.
To Playback Local *.avi Files:
•
Start your windows media player or other media player from <Start> menu (or any other
possible access).
•
Select <File> and then <Open>.
•
Select the wanted *.avi file, and click <Open>.
NOTE: The *.avi files stored for each channel are separated, and therefore the video can be
played back in single channel, full screen mode only.
To Playback Event Recording
•
Click SEARCH button positioned in the Main Window Toolbar. The Alarm List
appears.
•
Scroll through the events in the Alarm List and highlight the event of interest.
•
Double-click on the desired event to view the alarm recording.
10