LUXSAR VDR1640D Guide D'installation Rapide page 16

Connecting Remote PC with the DVR via Modem:
DVR Configuration>>
•
Connect a USB modem to the USB socket and connect a working phone line to the modem.
•
Press MENU and input the Administrator password to access the OSD Main menu. Select
<Network Setup> and then <Dial-in Setup> to set up the Dial-In settings, including Dial-in
Account, Password, Server and Client IP, etc.
PC Configuration>>
•
On your Windows PC, click <Start>, <My Network Places>, <View Network Connections>,
<Create New Connection> to select <Connect using dialup modem> to connect to the
internet through phone line.
•
Enter the phone number of the modem that is connected to the DVR.
•
Enter the Dial-in Account and Password that are specified in local DVR. Click <Finish> to
establish the connection.
Establishing Dial-up Modem Connection from the DVR for Remote Notification:
DVR Configuration>>
•
Connect a USB modem to the USB socket and connect a working phone line to the modem.
•
Press MENU and input the Administrator password to access the OSD Main menu. Select
<Network Setup> and then <Dial-out Setup> to set up the Dial-out settings, including
Dial-out IP, Phone Number, Dial-out Account, etc.
PC Configuration>>
•
On your PC, use the Network Connection Wizard to <Accept incoming connections>.
•
Enter the Dial-out Account and Password that are specified in local DVR.
•
Select network connection type to assign TCP/IP address for the PC. Click <Finish> to
complete the process.
Dome Control
Dome Connection & Settings:
•
See section Connecting Your DVR for RS-485 port pin definition.
•
Refer to the following figure. Connect the R+, R- terminals on the dome camera to the D+, D-
terminals on the RS-485 port by RS-485 cable respectively.
5