Basic Setup - LUXSAR VDR1640D Guide D'installation Rapide

Basic Setup

Follow the description to set up the DVR for date/time, recording and viewing video. All
configurations can be set via either DVR or LuxsarRemote 40.
Enter OSD Setup menu:
•
Press MENU to enter the OSD menu.
•
Enter password using Channel keys. The default passwords are as below.
Administrator Password
1 2 3 4
•
Strongly suggest changing the passwords to prevent unauthorized access.
Date / Time Setting:
The user can choose to either enter the Date/Time manually or use the Time Sync function to sync
the time with the time server periodically.
To setup the Date/Time manually>>
•
Select <Date/Time> in System Setup menu to enter the Date/Time menu.
•
Select the date and time using LEFT/RIGHT keys; then adjust the value using UP/DOWN
keys.
•
The new date and time settings take effect after confirm the changes.
To setup the Date/Time using the Time Sync function>>
•
Select <Date/Time> in System Setup menu to enter the Date/Time menu.
•
Select <Time Zone> to enter the time zone. To find out your local time zone, please visit
wwp.greenwichmeantime.com
•
After entering the time zone, the <Network Time Protocol Setup> option will appear. Select
the <Network Time Protocol Setup> to set the time server.
•
The default time server is time.nist.gov, but the user can change it to other time servers when
desired. A list of IP addresses of the time servers is listed below.
129.6.15.28
132.163.4.102
192.43.244.18
206.246.118.250
207.200.81.113
•
After the time server is set, select <Manually Time Sync> to sync the time.
•
The time sync can also be updated periodically. Select <Automatically Time Sync>, and
choose a desired time gap to sync the time.
User Password
4 3 2 1
129.6.15.29
132.163.4.103
131.107.1.10
208.184.49.9
64.236.96.53
3
132.163.4.101
128.138.140.44
69.25.96.13
64.125.78.85
68.216.79.113