FILTER SCREEN
WARNING: Ensure that the fan is switched off from the supply mains before removing the air
filter screen.
The filter is already assembled before delivery from factory. But the filter should be cleaned or
replaced after a certain time use. The method is mentioned below.
1.
Hold the filter down to the board position with force to back side can
remove filters.
2.
Tap the filter with certain object for cleaning. If the filter is really dirty,
dip it into natural detergent solution to wash and flush with water.
3.
Put the cleaned or newly replaced filter slightly into its proper position
Postseason storage:
When the air coller is out of season or not used for long time, corresponding maintenance
measures should be taken.
Pull out the water wedge to drain.
Turn off the air coller and unplug.
Wash the filter screen and reassemble it.
Cover the air coller with a plastic bag and place it at a dry place.
Take out of battery of remote control and keep properly.
7. IN THE EVENT OF A BREAKDOWN
Despite the care we take during production, a breakdown can never be totally ruled out. Before contacting your
retailer's after-sales department, please check that:
The appliance is properly plugged in
There is not a power cut in progress
The breakdown is not one of those described in the table at the end of this manual
IMPORTANT: if the power cable supplied is damaged, it must be replaced by the manufacturer, a service
27