Customer Service - Hamilton Beach Clean Cut Manuel D'instructions

840091200 ENv03.qxd 12/13/01 10:13 AM Page 6
Cleaning Your Can Opener
1. Unplug cord from electrical outlet.
2. To remove the cutting head
assembly, press release button.
3. Wash cutting head assembly in
hot soapy water. Rinse and dry
thoroughly. Can also be placed in
top rack of dishwasher.
4. Wipe the can opener body and
the area behind the cutting head
assembly with a damp cloth.
Never immerse the can opener in
water.
5. To re-assemble, raise lever slightly
then slide the assembly onto the
body until the release button clicks
into place.
Remove
Re-assemble
6
Hints for Best Use
• The can opener will easily open all standard size cans.
• If there is a bump, dent, or heavy seam in the rim of the
can, open the other end of the can or start cutter just
beyond the problem area.
• The motor of your can opener is permanently lubricated
and will require no oiling.
• To use the cord storage on the back of the opener, push in
or pull out the cord as needed.
• To lock the cord, turn cord sideways and slide up into cord
lock slot.
• If piercing lever does not move freely, remove and clean the
cutting head assembly.

Customer Service

If you have a question about your can opener, call our
toll-free customer service number. Before calling, please
note the model, type, and series numbers and fill in that
information below. These numbers can be found on the
bottom of your can opener. This information will help us
answer your question much more quickly.
MODEL:_____________ TYPE:_____________ SERIES: ______________
7