Cooper Lighting Solutions Portfolio LAM4B Multi Head Instructions D'installation page 5

6. Install sheet rock or grid tile flush with the edge of the
housing (Figure 1.13). Install wing nuts on the studs.
Place trim hook on studs. First, push one side of the
trim inside and tighten wing nut (Figure 1.14), Then the
opposite side. Also add ground wire to one stud before
tightening wing nut. (Figure 1.15)
Sheet rock/
ceiling
Trim Assembly
Figure 1.13.
Sheet rock/
ceiling
Figure 1.14.
Installation Instructions – LAM4B Multi Head Installation
Wing Nuts
Wing Nuts
Studs
Trim Assembly
Cooper Lighting Solutions
Trim Assembly
Figure 1.15.
IB520102ML
Sheet rock/ceiling
Installation instructions
5