Cooper Lighting Solutions Portfolio LAM4B Multi Head Instructions D'installation page 10

Installation Instructions – LAM4B Multi Head Installation
3.0 Replacing Optics:
Procedure: Using both thumbs, put pressure on the Media
holder and rotate counter-clockwise it ¼ turn (Figure 3.1).
Remove Media holder from light head assembly
(Figure 3.2), Remove Spacer rings, Optic holder, Optic and
replace new Optic into Optic holder (Figure 3.3). Align and
push back Media holder, Spacer rings, new Optic, Optic
holder into light head assembly (Figure 3.4). Put pressure on
the Media holder and rotate clockwise it ¼ turn (Figure 3.5).
Figure 3.1.
Figure 3.2.
10
Cooper Lighting Solutions
Light Head Assembly
Media Holder
IB520102ML Installation instructions
Media Holder
Spacer Ring
Optic Holder
Figure 3.3.
Media Holder
Optic Holder
Spacer Ring
Figure 3.4.
Figure 3.5.
Optic
Optic
Media Holder