Ce Declaration Of Conformity - FeinTech VMS04201 Manuel D'instructions

Caution: Make sure that the HDMI plug contacts are not dirty or damaged when connecting or
disconnecting the HDMI cables. Make connections without power and switch on the devices only
after connecting them. Please also pay attention to a good quality of the HDMI cables. Good
cables usually have a large diameter.
• Please do not cover the housing or power supply, or install the device to avoid overheating.
• Keep away from fire, heat sources, water and moisture.
• Do not place heavy objects on the device or the connection cables.
• Do not open or drill holes in the housing.
• Use only the supplied power adaptor or ensure identical performance data when replacing.
• Use only a soft, dry cloth to clean the surface of the unit. Please do not use aggressive clean-
ing agents, gasoline or the like.
• If the unit will not be used for a longer period of time, please unplug it from the mains.
Service
The device must be inspected by qualified personnel in the following cases.
• Objects or liquids have penetrated into the device.
• The unit does not operate normally or its performance has changed.
• The device has been dropped or the housing is damaged.
Disconnect the mains plug and do not continue to operate the device. Do not attempt to repair or
open the unit yourself. Contact a trained technician or contact the seller or FeinTech Service.

CE Declaration of Conformity

This product complies with EU directives and may only be used in conjunction with
shielded cables. We, Spreewald Kommunikationstechnik GmbH, hereby declare that
this device complies with the Low Voltage Directive 2014/35/EU, the EMC Directive 2014/30/
EU and the RoHS Directive 2011/65/EU. You can obtain the formal declaration of conformity at
https://feintech.eu/ce or on request.
15