Controlling Photo Playback; Listening To Radio; Setting Mono/Stereo; Presetting Stations - Samsung HT-E3500 Guide D'utilisation

Controlling Photo Playback

You can control the playback of photos located on
DVDs, CDs, and USB storage devices.
Using the Tools Menu
During playback, press the TOOLS button.
Start Slide
Show Select to start a slide show.
Slide Show
Select to adjust the slide show speed.
Speed
Background
Select to listen to music while viewing
Music
a slide show.
Select to enlarge the current picture.
Zoom
(Enlarge up to 4 times)
Select to rotate a picture.
Rotate
(This will rotate the picture either
clockwise or counter clockwise.)
Shows the picture information including
Information
the name and size, etc.
NOTE
| |
\ Depending on the disc or storage device, the Tools menu
may differ. All options may not be displayed.
\ To enable the background music function, the photo file
must be in the same storage media as the music file.
However, the sound quality can be affected by the bitrate
of the MP3 file, the size of the photo, and the encoding
method.
Creating a Photo Playlist
You can create a playlist of photos in a way that is
nearly identical to the way you create a playlist of
music files. For instructions, see "Creating a Music
Playlist" on page 34.

Listening to Radio

Using Buttons on the Remote Control
1 · Press the FUNCTION button to select FM.
2 · Tune in to the desired station.
• Preset Tuning 1 : Press the 5 button
to select PRESET and then press the
TUNING/CH (UP, DOWN) button to select
the preset station.
- Before you can tune to preset stations,
you must add preset stations to the
product's memory.
• Manual Tuning : Press the 5 button
to select MANUAL and then press the
TUNING/CH (UP, DOWN) button to tune in
to a lower or higher frequency.
• Automatic Tuning : Press the 5 button to
select MANUAL and then press and hold
the TUNING/CH (UP, DOWN) button to
automatically search the band.

Setting Mono/Stereo

Press the MO/ST button.
• Each time the button is pressed, the sound
switches between STEREO and MONO.
• In a poor reception area, select MONO for a
clear, interference-free broadcast.

Presetting Stations

Example : Presetting FM 89.10 into memory.
1 · Press the FUNCTION button to select FM.
2 · Press the TUNING/CH (UP, DOWN) button to
select <89.10>.
3 · Press the TUNER MEMORY button.
• NUMBER flashes on the display.
4 · Press the TUNER MEMORY button again.
• Press the TUNER MEMORY button before
NUMBER disappears from the display on its
own.
• After you press the TUNER MEMORY
button, NUMBER disappears from the
display and the station is stored in memory.
5 · To preset another station, repeat steps 2 to 4.
• To tune in to a preset station, press the
TUNING/CH (UP, DOWN) button.
35
|
English