Choosing A Mounting Method - Honeywell Home TrueEASE HE100 Instructions D'installation

Choosing a Mounting Method

Whether you purchased a Bypass or Fan humidifier will determine how your humidifier will be installed:
Which humidifier do you have?
Bypass:
Bypass humidifiers use the pressure difference
between the supply and return to move duct
air through the humidifier. Access to both the
supply and return are required. The bypass
humidifier can be positioned on either the
supply or return duct.
Before beginning Mounting:
I have confirmed local codes for proper plumbing practices.
I have chosen an installation location that meets the requirements on page 4.
Humidifier 69-2413EF—19
Fan:
Fan humidifiers use an internal fan to move duct
air through the humidifier pad and back into the
duct for distribution throughout your home. The
fan model is commonly installed directly onto the
supply (hot) air duct of your HVAC system.
The fan model can be installed on the return
(cool) air duct, if the location permits. When
a return-side installation is used, it is highly
recommended to plumb warm water since
humidity is produced by evaporation.
MCR29871
MCR29929
5