Water Supply And Drain Connections; Step One: Connect The Water Supply; Step Two: Tap Into A Water Line - Honeywell Home TrueEASE HE100 Instructions D'installation

Water Supply and Drain Connections

STEP ONE: Connect the Water Supply
2
3
STEP TWO: Tap into a Water Line
Water Supply
Line
Manual Shutoff
Valve
T-fitting
Humidifier 69-2413EF—19
1
MCR32931A
Saddle Valve
M29605
Use hot or cold water.
Cut the water line so it reaches from the humidifier to
the main water supply tap.
Insert the water line into the gray quick connect
fitting. Insert it fully, and apply modest pull pressure to
ensure a tight fit.
Note: The quick connect fitting can be removed if you
prefer to use a standard 1/4-in. brass compression nut
plumbing connection. Do not remove the filter if you
select this option.
• Consult local codes for proper plumbing.
• Use the saddle valve provided or a T-fitting and
manual shutoff valve to tap into the water line.
• Refer to the literature included with the valve you
chose and the local plumbing codes. Use proper
technique for the valve.
• Connect the other end of the humidifier water line
to the water valve.
11